1/16" X 18" SIL-FLEX CADMIUM-FREE SILVER BRAZING ALLOY
- ITEM#: EG26270000
- STANDARD PACK: 6 FT
- SHIPPING:
- RESTRICTIONS: none
Product Description
Sil-Flex™
Cadmium-Free Silver Brazing Alloy
Sil-Flex is a low melting point, thin-flowing alloy for use on all ferrous and non-ferrous metals (except aluminum, magnesium and zinc alloys).
- Cadmium free
- Good electrical conductivity
- Low melting point
- High strength
- Corrosion resistant
- Excellent wettability and capillary action
- Versatile — joins all metals except white metals
SPECIFICATIONS
- Joint strength: up to 70,000 psi/483 MPa
- Elongation: 36%
- Working temperature: 1150°F/621°C
- Electrical conductivity: 11.9% IACS
- Corrosion resistance: Good
- Coating: Orange
PROCEDURES
Thoroughly clean the weld area. Maintain a close fit-up; a joint clearance of 0.003” is ideal. Prefluxing is not necessary for most applications. Uniformly heat the weld area using a carburizing flame. Apply by melting off a small amount of flux and alloy. Allow the deposit to cool naturally. Remove flux residue with warm water.
1/16" X 18" SIL-FLEX CADMIUM-FREE SILVER BRAZING ALLOY
| Sil-Flex | |
| Silver Brazing | |
| All Metals Except White Metals | |
| Joining° Build-Up° Overlay | |
| 1/16" | |
| Flux-Coated Brazing Rod | |
| X-Ergon |
