Shop Partsmaster

1/8" X 18" 243 ALU-BOND ROD SOLDER ALLOY FOR ALUMINUM AND POT METAL

  • ITEM#: EG24340000
  • STANDARD PACK: 1 LB
  • SHIPPING:
  • RESTRICTIONS: none

Price available after Registration or Login

Quantity

Product Description

Alu-Bond™
Rod Solder Alloy for Aluminum and Pot Metal

  • Low temperature — prevents distortion and burn through on thin metals
  • Can be used to make aluminum more wear resistant in metal-tometal
    applications
  • Designed for use on aluminum, aluminum alloys and most zinc die cast
    (pot metal)
  • Excellent color match
  • No flux needed

SPECIFICATIONS

  • Joint strength: Up to 35,000 psi/235 MPa
  • Working temperature: 710°F/375°C
  • Color match: Excellent
  • Corrosion resistance: Excellent

PROCEDURES
All surface oxidation and contaminants must be removed prior to any repairs. The area to be repaired or built up should be mechanically cleaned with Cryo-Burrs™, Unloader™ or Tuff-Flex™ Disks. Before soldering, use Metal Groom™ to thoroughly degrease the surface. Sections over 3/16” thick should be beveled. Clamp the parts for perfect alignment. Use a carburizing flame and heat to 750°F/400°C. Melt the alloy by rubbing the rod vigorously on the heated surface. Do not heat the alloy directly with the flame. A better bond with higher
strength can be obtained by brushing through the molten Alu-Bond with a clean stainless steel brush and then reapplying the solder. After completing repairs, allow the workpiece to cool in still air.

1/8" X 18" 243 ALU-BOND ROD SOLDER ALLOY FOR ALUMINUM AND POT METAL

Alu-Bond
Solder
Aluminum And Zinc Alloys
Joining° Build-Up° Overlay
1/8" x 18"
Bare Wire
X-Ergon

1/8" X 18" 243 ALU-BOND ROD SOLDER ALLOY FOR ALUMINUM AND POT METAL

Alu-Bond
Solder
Aluminum And Zinc Alloys
Joining° Build-Up° Overlay
1/8" x 18"
Bare Wire
X-Ergon

    Safety Data Sheets (SDS)