Shop Partsmaster

1/8" X 18" SQUARE ECON-ALLOY CADMIUM-FREE SELF-FLUXING SILVER ALLOY FOR COPPER

  • ITEM#: EG26540000
  • STANDARD PACK: 1 LB
  • SHIPPING:
  • RESTRICTIONS: none

Price available after Registration or Login

Quantity

Product Description

Econ-Alloy™ - Self-Fluxing Silver Alloy for Copper

Econ-Alloy is designed for fast-flow joining of copper to copper for strong,
leakproof joints. It works for brass and bronzes as well when used with 361 flux.

  • Low temperature — easy flowing
  • Superb wetting action
  • No additional flux needed on clean copper joints
  • Any position brazing
  • Cadmium free

SPECIFICATIONS

  • Joint strength: up to 90,000 psi/621 MPa
  • Elongation: 28%
  • Working temperature: 1185°F/640°C
  • Electrical conductivity: 5.47% IACS

PROCEDURES
Parts should be mechanically or chemically cleaned before brazing. The use of a flux is not required on copper to-copper joints. Small amounts of X-Ergon #361 Silver Flux should be used where brass or bronzes are to be joined.

Optimum results are obtained by maintaining a joint tolerance between .003'' and .005''. Resistance to capillary attraction generally increases below .003'' and tensile strength generally declines above .005''.

All base-metal parts must be evenly heated. In the event one of the base metal parts is not sufficiently hot to melt the filler alloy, alloying will not take place This is known as a cold joint. Heat alloy by conduction. Filler alloy should not be melted by direct flame from a torch, but by heat conducted through the base metals to the
joint area. A neutral flame should be used placing the inner cone approximately 1/2'' from the work piece. The flame should be directed near the joint, but not on it.

1/8" X 18" SQUARE ECON-ALLOY CADMIUM-FREE SELF-FLUXING SILVER ALLOY FOR COPPER

Econ-Alloy
Silver Brazing
All Metals Except White Metals
Joining° Build-Up° Overlay
1/18" x 18" Square
Bare Brazing Rod
X-Ergon

1/8" X 18" SQUARE ECON-ALLOY CADMIUM-FREE SELF-FLUXING SILVER ALLOY FOR COPPER

Econ-Alloy
Silver Brazing
All Metals Except White Metals
Joining° Build-Up° Overlay
1/18" x 18" Square
Bare Brazing Rod
X-Ergon

    Safety Data Sheets (SDS)