Shop Partsmaster

1/8" X 36" ALU-BRAZE 241 PREMIUM ALUMINUM BRAZING ALLOY

  • ITEM#: EG24140000
  • STANDARD PACK: 1 LB
  • SHIPPING:
  • RESTRICTIONS: none

Price available after Registration or Login

Quantity

Product Description

Alu-Braze™ 
Premium Aluminum Brazing Alloy 

Alu-Braz is a versatile aluminum brazing alloy formulated to provide high-quality deposits on all weldable grades of aluminum. 
  • Two-phase plastic range — enables deposit to solidify quickly for excellent results on poor-fitting joints or building up sections 
  • Thin flowing ability — allows great results on thin gauge or small parts 
  • Very high ductility — resists cracking 
  • High-strength deposits 
  • Corrosion resistant 
  • Use with 341 X-Ergon aluminum brazing flux
SPECIFICATIONS
  • Tensile strength: up to 34,000 psi/234 MPa
  • Elongation: 25
  • Working temperature: 1000°F/538°C
  • Corrosion resistance: Good
  • Color match: Good (will darken if anodized)
  • Coating: Bare

PROCEDURES
Clean the weld area thoroughly. Remove all dirt, grease, oil, paint and fatigued metal. If a grinding wheel is used, do final cleaning with a stainless steel brush or a metal cleaner. Bevel to a 90° “V”, any base metal over 1/8'' thick. Leave a 1/16'' gap, carefully maintaining alignment of parts. Preheat the area with a slightly carburizing flame. Apply X-Ergon #341 Flux by heating the tip or rod, dipping into a flux jar, and transferring flux to the weld area. Continue to use flux as needed. When flux melts off onto the base metal and liquefies, begin to apply the rod. Keep the torch constantly in motion. Apply the rod by touching the tip to the base metal. Melt off a small amount of rod and wet it out. Be certain that each deposit flows out and is bonded to the base metal before adding subsequent deposits. Allow to cool slowly. Thoroughly clean off flux residue with wire brush and water while the deposit is still warm.

1/8" X 36" ALU-BRAZE 241 PREMIUM ALUMINUM BRAZING ALLOY

Alu-Braz
Brazing
Aluminum
Joining° Build-Up° Overlay
1/8" x 36"
Bare Brazing Rod
X-Ergon

1/8" X 36" ALU-BRAZE 241 PREMIUM ALUMINUM BRAZING ALLOY

Alu-Braz
Brazing
Aluminum
Joining° Build-Up° Overlay
1/8" x 36"
Bare Brazing Rod
X-Ergon

    Safety Data Sheets (SDS)